> Directional (CIP) - Product Overview

 

Directional (CIP) TGSIs

 

Product Overview

 

ESP Product Codes

  • ESP-CIP-INT-DIR-TGSI-600x300

Group

Tactile Ground Surface Indicators (TGSIs)

Type

DIRECTIONAL

(Truncated Bars)

Configuration

Integrated Type - (TGSIs that are in a defined pattern and which are of the same luminance and material as the product's base surface)

Surface Application

Each ESP CIP Directional TGSI Access Tile is designed to be applied to the un-set or un-cured substrate or surface; predominately concrete. Additional installation methods are referenced in the ESP Technical Product Data (TPD) Documents for each ESP TGSI Access Tile product.

Product Material

Fibre-reinforced Herculite polymer

Physical Environments

Internal & External, Hot & Freezing, Wet & Dry

Intended Use

For each ESP Directional Tile to be effective, the intended use of this product must meet compliance with AS/NZS 1428.4.1:2009 Amdt No.s 1 & 2 - Section 3 - 2.1 (a), (b), (c), 2.2 (a), (b) and 2.3 installed as to the tested results, as independently verified, in accordance with Appendix E of the above standard.

Removable Film

During the manufacturing process, a removable plastic film is applied to each ESP Cast In Place TGSI to the trafficable top surface protect it from dirt and damage during the application process in wet concrete.

Example of Removable Film: (Product appearance may vary)

Example of Removable Film: (Product appearance may vary)

 

Dimensional Drawings

600 x 300

ESP-CIP-INT-DIR-TGSI-600x300+-+TOP_Details.jpg

Dimensional Drawing Notes

Detailed and specific technical, engineering and compliance product information about the ESP Cast In Place (CIP) TGSI Access Tile, is available from ESP Australia on request. Please quote the applicable product code for each Technical Product Data (TPD) document as required.

Note: All dimensions are in millimetres and are not to scale

Finished Surface/Substrate Application

  • Ceramic & Vitrified Tiles,

  • Timber & WPC Decking,

  • Concrete, Masonry,

  • Exposed Aggregate,

  • Concrete Pavers,

  • Brick Pavers,

  • Asphalt,

  • Bluestone, Granite,

  • Limestone,

  • Sandstone,

  • Engineered Stone,

  • Vinyl,

  • Carpet (Thick) - Loop Pile (with Underlay)

Installation Methods

  • Method 5 -

    Cast In Place

    (during the curing of wet concrete)

  • Method 6 -

    Boxed, Cast In Place
    (during the curing of wet concrete)

  • Method 7 -

    Drill, Clean, Plug, Pack, Glue & Fixing

  • Method 8 -

    Set-Down, Drill, Clean, Plug, Pack, Glue & Fixing

  • Method 9 -

    Recess, Board, Drill, Clean, Plug, Pack, Glue & Fixing