> Directional (SA) Product Overview

 

Directional (SA) TGSIs

Product Overview

 
 

ESP Product Codes

  • ESP-SA-INT-DIR-TGSI-600x300

Group

Tactile Ground Surface Indicators (TGSIs)

Type

DIRECTIONAL

(Truncated Bars)

Configuration

Integrated Type - (TGSIs that are in a defined pattern and which are of the same luminance and material as the product's base surface)

Surface Application

Each ESP Directional Access Tile, is applied to the finished substrate or existing finished surface, that possesses suitable and stable structural integrity. Additional installation methods are referenced in the ESP Technical Product Data (TPD) Documents for each ESP TGSI Access Tile product.

Product Material

Fibre-reinforced Herculite polymer

Physical Environments

Internal & External, Hot & Freezing, Wet & Dry

Intended Use

For each ESP Directional Tile to be effective, the intended use of this product must meet compliance with AS/NZS 1428.4.1:2009 Amdt No.s 1 & 2 - Section 3 - 2.1 (a), (b), (c), 2.2 (a), (b) and 2.3 installed as to the tested results, as independently verified, in accordance with Appendix E of the above standard.

 

Dimensional Drawings

600 x 300

ESP-CIP-INT-DIR-TGSI-600x300+-+TOP_Details.jpg

Dimensional Drawing Notes

Detailed and specific technical, engineering and compliance product information about the ESP Surface Applied (SA) TGSI Access Tile, is available from ESP Australia on request. Please quote the applicable product code for each Technical Product Data (TPD) document as required.

Note: All dimensions are in millimetres and are not to scale

Finished Surface/Substrate Application

  • Ceramic & Vitrified Tiles

  • Escalator & Travelator Motor Covers

  • Metal Checker Plate & Access Covers

  • Timber Floor Boards,Timber & WPC Decking

  • Timber Floating Floor & Engineered Floor

  • Concrete, Masonry, Exposed Aggregate, Terrazzo,

  • Concrete Pavers, Brick Pavers,

  • Asphalt

  • Bluestone, Granite, Limestone, Sandstone. Engineered Stone

  • Artificial Grass & External Matting

  • Vinyl, Epoxy/Self-Levelling Compounds,

  • Carpet (Thin) & Carpet Tiles

  • Carpet (Thick) - Loop Pile (with Underlay)

Installation Methods

  • Method 1 -

    Clean & Glue

  • Method 2 -

    Drill, Clean, Glue & Fixing

  • Method 3 -

    Drill, Clean, Glue, Plug & Hammer

  • Method 4 -

    Recess, Drill, Clean, Glue & Fixing